Gabrian's

The ASD-120 2.0 is a six channel power sequencing device intended for use in installations where multiple electrical loads must be powered on and off in a delayed and
orderly sequence.

Please Note: Because the ASD-120 2.0 switches hazardous voltages and high currents, we recommend that the installation be performed by a qualified electrician. For safe operation, the ASD-120 2.0 must be installed in accordance with local/municipal requirements and the National Electrical Code (NEC). Please feel free to contact Furman Technical Services if you have any questions or concerns regarding the installation, operation or application of the ASD-120 2.0.

• AC Input Voltage
• 120/240V single phase, or 120/208V three phase.
• Input Current: 120 Amps maximum
• Output: Six, 120V 20A circuits
• Maximum AC Current Rating
• Six, 120V 20A circuits for 120A total.
• Power Distribution Block
• Wire Guage 2, 3, 4-6 AWG,
• Phase indicators: 3 LEDs, one per phase X, Y, and Z
• AC Output Receptacles
• Rear Panel Outlets: 6 duplex NEMA 5-20R sequenced.
• Front Panel: 6 thermal circuit breakers, one per
• duplex pair.
• Operating Temperature and Humidity
• 5 to 40C (40 to 105F), <90% Relative Humidity
• User Interface
• Key-switch: Front panel, 3 position (On/Off/Remote)
• Keys: Included, 1 pair
• Push Button Switch: Front panel
• Circuit Breakers: Front panel, push-button; 6, 20A Thermal Breakers
• Output Circuit Status: Front panel indicators – one per output
• Configuration Switches: Front panel, hidden by security cover;
• 3 maximum delay switches – 1, 2, and 4 minute
• Force Off NO/NC, 12V mode On/Off, GND mode ON,
• Momentary/Maintained mode selection
• Fine Delay Adjustment: Potentiometer hidden by security cover.
• Sequence Bypass : 6 Switches, 3 States (ON/SEQUENCE/OFF)
• Phase indicators: 3 LEDs, one per phase X, Y, and Z
• Control/Status/Triggering (Rear Panel)
• Remote Terminal: Phoenix-type 4 Pin Connector w/Screw
• Terminals;
• +12V @ 250mA, STAT, REM, GND (Class 2 wiring)
• +5 to 30VDC at REM input terminal.
• Delay Outputs: Phoenix-type 8-Pin Connector with Screw
• Terminals
• 6 relay contacts with NO and NC common connections
• (Class 2 wiring)
• A, B, C, D, E, and F relay contacts switched with output circuits,
• 1A@48VDC
• Force Off: Phoenix-type 2 Pin Connector with Screw Terminals;
• Optically isolated, 12V, 10mA current source
• (Class 2 wiring)
• Senses external relay contact closure
• Power Consumption
• Standby: 5 Watts
• Sequenced ON: 20 Watts
• PRODUCT DIMENSIONS. 19” L x 10” D x 3.5” H
• WEIGHT. 16lbs

In The Box:
Furman ASD-120 2.0
Warranty card

Warranty Information By Furman. Has Limited Warranty terms of one, three or five years (depending on the model). This warranty will cover defects in materials or workmanship on registered units. Our warranty covers parts and labor, with the term measured from the date of purchase of the new unit by the original owner. The warranty is not transferable.