Engineered specifically for use with instrument amplifiers and other
high-current equipment, the Furman P-1800 PF R offers a stable,
protected and filtered low impedance powered supply for maximum
performance of connected electronics. Furman's exclusive Power Factor
provides a 45A peak current reservoir to minimize the detrimental
effects of line impedance on high-current gear such as amplifiers and
powered monitors. Clear Tone Technology provides additional line noise
filtration tuned for instrument amplifiers for clean and consistent
tone. Plus, equipment benefits from professional-level protection thanks
to Furman's exclusive SMP and EVS technologies.
Power Factor Technology
Your amp needs a lot of
power to sound its best. If you’re plugging into the wall, there’s a
good chance your amp is not going to get the current it needs when
pushed. Furman’s exclusive Power Factor Technology provides a 45A peak
current reservoir to give your amp the headroom it needs to operate at
maximum efficiency. No matter what venue or club, or how close or far
away from the power panel, Furman’s Power Factor Technology keeps your
instrument amplifier’s tone consistent and sounding it’s best.
Clear Tone Technology
Clear Tone Technology works
in unison with Power Factor Technology and Linear Filtering Technology
to add an additional layer of AC noise filtration specifically
engineered for instrument amplifiers. Clear Tone Technology provides
tuned circuits that unveil instrument tone, harmonics, and clarity,
resulting in a fuller sound and improved dynamic response.
| Maximum Current: | 15 amps @ 124 Volts |
| Line Cord: | Captive 3/14 AWG, 10 ft. black cord with NEMA 15 plug |
| BNC Socket w/Switch: | 12VAC 500MA maxx (lamp not included) |
| Operating Voltage: | 90 to 139 VAC |
| Over-Voltage Shutdown: | 140 VAC Nominal |
| Spike Protection Mode: | Line to neutral, zero ground leakage |
| Spike Clamping Voltage: | 188 VAC peak @ 3,000 Amps |
| Response Time: | 1 nanosecond |
| Maximum Surge Current: | 6,500 Amps |
| Noise Attenuation: | 30 dB @ 2 kHz, 40 dB @ 10 kHz, 50 dB @ 20 kHz, 70 dB @ 100 kHz |
| Dimensions: | 19” W x 12” D x 1.75” H |
| Weight: | 13 lbs. |
| Power Consumption: | 8 watts |
| Reactive Power: | 460 VA |
