The BM12 mkIII expands on the legacy of the classic BM12A design.
Re-voiced around Dynaudio's next generation waveguide, the BM12 mkIII
has been designed around highly efficient hand-crafted neodymium
drivers, providing faithful transient response and an SPL of 123 dB for
larger listening environments.
• Extended excursion 8" woofer with pure aluminum voice coil. • 1.1" soft dome tweeter with pure aluminum voice coil. • 100W LF and 50W HF Class AB amplifier. • Bundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper angling. • Optional TC Electronic Level Pilot or BMC-2 for precision level control • Made in Denmark
Features
- 123dB SPL peak power output
- Frequency response of 38Hz-21kHz
- Extended bass with BM14S II precision subwoofer
- HF, MF, LF analog room filters allow flexible positioning
- High pass filters at 60/80Hz for perfect subwoofer adaption
- Input sensitivity switch (-10/+4dB range)
IsoAcoustics Monitor Stands
When we started looking for the best solution for
isolating the BM mkIII monitors from the surface, we found that
IsoAcoustics provide the best and most flexible product on the
market.
Therefore, we formed a partnership with IsoAcoustics
that allowed us to bundle every BM mkIII monitor with a
dual-branded stand that also allows you to angle your monitors
slightly upwards or downwards in order to match your listening
position perfectly.
The ISO-L8R155 is bundled with BM Compact mkIII and
BM5 mkIII, while the ISO-L8R200 is included with BM6 mkIII and BM12
mkIII.
- Model BM12 mkIII
- System Two-way Active Nearfield Monitor
- Frequency Response (+/- 3 dB) 38Hz - 21kHz
- Input level for 85 dB SPL @1m 123 dB
- Power consumption Idle: 15 W / Max: 130 W
- Amplifier power Tweeter: 50 W / Woofer: 100 W
- Resonance Frequency 40 Hz
- Bass Principle Bass reflex
- Crossover Frequencies 1500 Hz
- Crossover Slope 6 dB/oct
- Tweeter Esotec 28 mm/1.1“ soft dome, Rear chamber, Magnetic fluid, 4 mm alu front, Pure alu wire voice coilvoice coil
- Woofer 200 mm/8”, One-piece molded poly-prop cone, 75 mm/3” kapton voice coil, Neodymium magnet
- Weight 12,5 kg / 27.5 lbs
- Dimensions (W x H x D) 234 x 369 x 328 mm / 9.2” x 14.6” x 12.9”
By Dynaudio: Warranty Dynaudio Professional products are warranted to be free from defects in components and factory workmanship under normal use and service for a period of two (2) years when bought from a reseller within the EU. Dynaudio Professional products are warranted to be free from defects in components and factory workmanship under normal use and service for a period of one (1) year when bought from a reseller outside the EU. When failing to perform as specified during the warranty period we will undertake to repair, or at our option, replace this product at no charge to its owner, provided the unit is returned undamaged and shipping prepaid, to an authorized service facility or to the factory. Dynaudio shall not be responsible for any incidental or consequential damages. Dynaudio's responsibility is limited to the product itself. Dynaudio assumes no responsibility for any loss due to cancellation of any events, or rent of replacement equipment or costs due to third party's or customer's loss of profit, or any other indirect cost or losses however incurred. Dynaudio reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured and / or sold. The product warranty is only valid in the country where the product was purchased. Exceptions Dynaudio will always follow the law of the respective markets should it differ from the policy stated above or the exceptions stated below. This warranty shall be null and void, if the product is subjected to repair work or alteration by a person or facility other than those authorized by Dynaudio; mechanical damage including shipping accidents; war, civil insurrection, misuse, abuse, operation with incorrect AC voltage, incorrect connections, wrong accessories, incorrect use of accessories, operation with faulty associated equipment, exposure to inclement weather conditions and normal wear and tear. Units, on which the serial number has been removed or defaced, are not eligible for warranty service.
|