Provides huge kick drum sound. Ground shaking low end combined with exceptional clarity and attack.
The D6 is used for stage, studio and broadcast applications.
Designed with a cardioid pickup pattern for isolation and feedback
control, the D6 is equipped with a VLM™ diaphragm for natural, accurate
sound reproduction. Lightweight, compact and easy to position, the
D6 is an excellent choice for miking instruments requiring extended low
frequency reproduction such as kick drums, large toms and bass
cabinets. The D6s transformer less design, low impedance and balanced
output allow for interference-free performance. Designed, assembled, and tested by Audix in the USA. The D6 is used for stage, studio and broadcast applications. Designed
with a cardioid pickup pattern for isolation and feedback control, the
D6 is equipped with a VLM diaphragm for natural, accurate sound
reproduction. The D6 is lightweight, compact and easy to position.
With a
wide frequency response of 30 Hz - 15 kHz and the ability to handle
SPLs in excess of 144 dB, the D6 is an excellent choice for miking
instruments requiring extended low frequency reproduction such as kick
drums, large toms and bass cabinets.
The D6 is manufactured with a
precision machined aluminum body, black anodized finish, laser etched
model and serial number, steel mesh grill, Switchcraft XLR connector and
includes a tension-fit heavy-duty nylon microphone clip.
Transformerless design, low impedance and balanced output allow for
interference-free performance; even with long cable runs.
Transducer
Type: Dynamic Frequency Response: 30 Hz - 15 kHz Polar Pattern: Cardioid
Output Impedance: 200 ohms Sensitivity: .8 mV/Pascal @ 1k Off Axis
Rejection: > 20 dB Maximum SPL: >144 dB
Model Variations: D6N - Nickel plate (see Gallery photo 2)
D6S - Satin silver (anodized, see Gallery photo 3)
D6KD - D6 with KD mic stand (see Gallery photo 5)
- Transducer Dynamic
- Polar Pattern Cardioid
- Frequency Response 30Hz - 15kHz
- Dynamic Range (Typical) not specified by manufacturer
- Signal-to-Noise Ratio not specified by manufacturer
- Maximum Input Sound Level 144dB
- Power Requirements not applicable, dynamic microphones do not require power
- Output Impedance 200 ohms
- Output Connectors 3-pin XLR
- Pad No
- Low Frequency Roll-Off No
- Dimensions not specified by manufacturer
- Weight 4.5 oz (128 grams)
- Download spec sheet
Audix Limited Warranty Audix guarantees our products to be free of manufacturing defects as follows: 5 years for dynamic microphones. 3 years for condensers and wireless products.
Products found to be malfunctioning due to a manufacturing defect will be repaired or replaced at no charge to the customer. All other repairs will result in a nominal service charge
|
