Hypercardioid Dynamic Drum and Instrument Microphone for Instruments Requiring Additional Bass Response
With a wide frequency response of 40 Hz - 18 kHz and the
ability to handle SPLs in excess of 144 dB, the D4 is an excellent
choice for miking instruments requiring precise, low frequency
reproduction such as large rack toms, floor toms, cajon, djembe,
tympani, leslie bottom, bass flute, saxophone and baritone saxophone,
trombone, acoustic bass, bass cabinets and small kick drums. The
D4 is lightweight, compact and easy to position. Used for stage, studio
and broadcast applications, the D4 is designed with a hypercardioid
pickup pattern for isolation and feedback control. The D4 is also
equipped with a VLM™ diaphragm for natural accurate sound
reproduction. The D4 is used for stage, studio and broadcast applications. Designed
with a hypercardioid pickup pattern for isolation and feedback control,
the D4 is equipped with a VLM diaphragm for natural, accurate sound
reproduction.
The D4 is lightweight, compact and easy to position.
With a
wide frequency response of 40 Hz - 18 kHz and the ability to handle
SPLs in excess of 144 dB, the D4 is an excellent choice for miking
instruments requiring precise low frequency reproduction such as large
rack toms, floor toms, cajon, djembe, tympani, leslie bottom, bass
flute, saxophone and baritone sax, trombone, acoustic bass, bass
cabinets and small kick drums.
The D4 is manufactured with a precision
machined aluminum body, black anodized finish, laser etched model and
serial number, steel mesh grill, Switchcraft XLR connector and is
supplied with a tension-fit heavy-duty nylon microphone clip.
Transformerless design, low impedance and balanced output allow for
interference-free performance; even with long cable runs.
Transducer
Type: Dynamic Frequency Response: 40 Hz - 18 kHz Polar Pattern:
HypercardioidOutput Impedance: 200 ohms Sensitivity: 1.4 mV/Pascal @ 1k
Off Axis Rejection: > 20 dB Maximum SPL: >144 dB
- Transducer Dynamic VLM Type D (Transformerless)
- Polar Pattern Hypercardioid
- Frequency Response 38Hz to 19kHz
- Dynamic Range (Typical) not specified by manufacturer
- Signal-to-Noise Ratio not specified by manufacturer
- Maximum Input Sound Level 144dB
- Power Requirements Dynamic Transducer - no external power required
- Output Impedance 200 Ohms
- Output Connectors 3-pin XLR male
- Pad No
- Low Frequency Roll-Off No
- Dimensions not specified by manufacturer
- Weight 4.5 oz (128 grams)
- Download spec sheet
Audix Limited Warranty Audix guarantees our products to be free of manufacturing defects as follows: 5 years for dynamic microphones. 3 years for condensers and wireless products.
Products found to be malfunctioning due to a manufacturing defect will be repaired or replaced at no charge to the customer. All other repairs will result in a nominal service charge
|
